Touchless 2-way/3-way switch. Sensor 230V. Without cover. Extension switch, slave. FreeTouch.
Important: It is not possible to connect a FreeTouch® sensor with a product from another brand. For example, you cannot create a two-way switch configuration with a conventional mechanical two-way switch. If you want to control a light from 2 or 3 different locations without physical contact or adjust its brightness through touchless dimming, you have the choice between a two-way switch configuration (for 2 control points) or a three-way switch configuration (for 3 control points). 1.) Install a FreeTouch® On/Off Light Switch (Product Number FT-S-230), a FreeTouch® Dimmer (Product Number FT-D-230), or a 230V SmartHome Switch (Product Number FT-SH-230) as the "Master." 2.) To this Master, you can then connect 1, 2, or as many FreeTouch® two-way/three-way switches (Product Number FT-X-230) as "Slaves." With this setup, each control point behaves like an independent switch or dimmer.
Technical specifications: Capacitive sensor with integrated relay. Maximum load: 2400W. Minimum load: 0W. 240V / 50 Hz. 10A. 230V-240V. Neutral wire is necessary (3-wire connection). Standby power consumption is only approximately 0.18W. Can be mounted into an existing standard EU round wall box of 68 mm, either using expansion clips or screws.
Please order the front panel / cover separately.
PACKAGE CONTENTS: 1 FreeTouch® Sensor FT-X-230. For two-way and three-way configurations with other FreeTouch® sensors. Installation manual.